Acceptance requirements for plastic woven geotextiles

2019-08-17 15:01 Source:未知 Writer: Steven
Plastic woven geotextile appearance quality requirements:

1) The latitude and longitude density deviation is not allowed to be less than 2 in comparison with the nominal density within 100mm.

2) The broken wire is not allowed to have more than 2 broken wires at the same place, 2 pieces of broken wire within the same place (including 2 pieces), no more than 6 pieces within 100m2.

3) Spider web: Spider webs with a heavy rain of 50 square mm2 are not allowed. Spider webs smaller than 50 mm2, no more than 3 within 100 m2.

4) Bad edge: The whole roll is not allowed to have continuous burrs and loose edges with a length greater than 2000mm.

The quality requirements of plastic woven geotextiles can be checked and accepted according to this standard during the construction and quality inspection.

Key words:   Plastic woven geotextile   Geotextile   Geomembrane

Contact us

Co: Dezhou Wings Import And Export Co.,Ltd.
Add: Lingcheng Area, Dezhou City, Shandong Province, China. 253000.
Cel: +86-18506403738(WeChat)
Skype: Katherine-ZhengHao
QQ: 932770440

Quick Contact